2009 Mazda 6 vs. 1958 Talbot 2500

To start off, 2009 Mazda 6 is newer by 51 year(s). Which means there will be less support and parts availability for 1958 Talbot 2500. In addition, the cost of maintenance, including insurance, on 1958 Talbot 2500 would be higher. At 2,491 cc (4 cylinders), 1958 Talbot 2500 is equipped with a bigger engine. In terms of performance, 2009 Mazda 6 (170 HP @ 6000 RPM) has 51 more horse power than 1958 Talbot 2500. (119 HP @ 5000 RPM). In normal driving conditions, 2009 Mazda 6 should accelerate faster than 1958 Talbot 2500. With that said, vehicle weight also plays an important factor in acceleration. 1958 Talbot 2500 weights approximately 45 kg more than 2009 Mazda 6.

Because 1958 Talbot 2500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1958 Talbot 2500. However, in wet, icy, snow, or gravel driving conditions, 2009 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mazda 6 (226 Nm @ 4000 RPM) has 30 more torque (in Nm) than 1958 Talbot 2500. (196 Nm @ 2200 RPM). This means 2009 Mazda 6 will have an easier job in driving up hills or pulling heavy equipment than 1958 Talbot 2500.

Compare all specifications:

2009 Mazda 6 1958 Talbot 2500
Make Mazda Talbot
Model 6 2500
Year Released 2009 1958
Engine Size 2489 cc 2491 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 170 HP 119 HP
Engine RPM 6000 RPM 5000 RPM
Torque 226 Nm 196 Nm
Torque RPM 4000 RPM 2200 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Vehicle Weight 955 kg 1000 kg
Vehicle Length 4930 mm 4210 mm
Vehicle Width 1850 mm 1650 mm
Vehicle Height 1480 mm 1340 mm
Wheelbase Size 2800 mm 2510 mm