2009 Mercedes-Benz CL vs. 2011 Ford Bantam
To start off, 2011 Ford Bantam is newer by 2 year(s). Which means there will be less support and parts availability for 2009 Mercedes-Benz CL. In addition, the cost of maintenance, including insurance, on 2009 Mercedes-Benz CL would be higher. At 5,512 cc (12 cylinders), 2009 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2009 Mercedes-Benz CL (510 HP) has 436 more horse power than 2011 Ford Bantam. (74 HP). In normal driving conditions, 2009 Mercedes-Benz CL should accelerate faster than 2011 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercedes-Benz CL weights approximately 1165 kg more than 2011 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2009 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2009 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 2011 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercedes-Benz CL (830 Nm @ 1800 RPM) has 720 more torque (in Nm) than 2011 Ford Bantam. (110 Nm @ 3000 RPM). This means 2009 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 2011 Ford Bantam. 2009 Mercedes-Benz CL has automatic transmission and 2011 Ford Bantam has manual transmission. 2011 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercedes-Benz CL will be easier to drive especially in heavy traffic.
Compare all specifications:
2009 Mercedes-Benz CL | 2011 Ford Bantam | |
Make | Mercedes-Benz | Ford |
Model | CL | Bantam |
Year Released | 2009 | 2011 |
Body Type | Coupe | Pickup |
Engine Position | Front | Front |
Engine Size | 5512 cc | 1295 cc |
Engine Cylinders | 12 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 3 valves | 2 valves |
Horse Power | 510 HP | 74 HP |
Torque | 830 Nm | 110 Nm |
Torque RPM | 1800 RPM | 3000 RPM |
Engine Bore Size | 83 mm | 74 mm |
Engine Stroke Size | 94 mm | 75.5 mm |
Engine Compression Ratio | 10.7:1 | 10.2:1 |
Fuel Type | Diesel | Gasoline |
Acceleration 0-100mph | 4.6 seconds | 12.9 seconds |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 4 seats | 2 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 2185 kg | 1020 kg |
Vehicle Length | 5070 mm | 4280 mm |
Vehicle Width | 1880 mm | 1470 mm |
Vehicle Height | 1420 mm | 1640 mm |
Wheelbase Size | 2960 mm | 2670 mm |
Fuel Consumption Overall | 18.1 L/100km | 8.8 L/100km |
Fuel Tank Capacity | 90 L | 54 L |