2009 Mercedes-Benz E vs. 2010 Aston Martin V8 Vantage

To start off, 2010 Aston Martin V8 Vantage is newer by 1 year(s). Which means there will be less support and parts availability for 2009 Mercedes-Benz E. In addition, the cost of maintenance, including insurance, on 2009 Mercedes-Benz E would be higher. At 4,700 cc (8 cylinders), 2010 Aston Martin V8 Vantage is equipped with a bigger engine. In terms of performance, 2010 Aston Martin V8 Vantage (420 HP @ 7300 RPM) has 152 more horse power than 2009 Mercedes-Benz E. (268 HP @ 6000 RPM) In normal driving conditions, 2010 Aston Martin V8 Vantage should accelerate faster than 2009 Mercedes-Benz E. With that said, vehicle weight also plays an important factor in acceleration. 2010 Aston Martin V8 Vantage weights approximately 384 kg more than 2009 Mercedes-Benz E. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Aston Martin V8 Vantage (469 Nm @ 5000 RPM) has 119 more torque (in Nm) than 2009 Mercedes-Benz E. (350 Nm @ 2400 RPM). This means 2010 Aston Martin V8 Vantage will have an easier job in driving up hills or pulling heavy equipment than 2009 Mercedes-Benz E. 2009 Mercedes-Benz E has automatic transmission and 2010 Aston Martin V8 Vantage has manual transmission. 2010 Aston Martin V8 Vantage will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercedes-Benz E will be easier to drive especially in heavy traffic.

Compare all specifications:

2009 Mercedes-Benz E 2010 Aston Martin V8 Vantage
Make Mercedes-Benz Aston Martin
Model E V8 Vantage
Year Released 2009 2010
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 3498 cc 4700 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type V V
Valves per Cylinder 4 valves 4 valves
Horse Power 268 HP 420 HP
Engine RPM 6000 RPM 7300 RPM
Torque 350 Nm 469 Nm
Torque RPM 2400 RPM 5000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1326 kg 1710 kg
Vehicle Length 4870 mm 4382 mm
Vehicle Width 1490 mm 1867 mm
Vehicle Height 1830 mm 1270 mm
Wheelbase Size 2860 mm 2604 mm
Fuel Tank Capacity 80 L 80 L