2009 Mercury Mountaineer vs. 2010 Fiat Linea
To start off, 2010 Fiat Linea is newer by 1 year(s). Which means there will be less support and parts availability for 2009 Mercury Mountaineer. In addition, the cost of maintenance, including insurance, on 2009 Mercury Mountaineer would be higher. At 4,606 cc (8 cylinders), 2009 Mercury Mountaineer is equipped with a bigger engine. In terms of performance, 2009 Mercury Mountaineer (292 HP @ 5700 RPM) has 203 more horse power than 2010 Fiat Linea. (89 HP @ 4000 RPM). In normal driving conditions, 2009 Mercury Mountaineer should accelerate faster than 2010 Fiat Linea. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mercury Mountaineer weights approximately 647 kg more than 2010 Fiat Linea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2009 Mercury Mountaineer is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2009 Mercury Mountaineer. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Linea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mercury Mountaineer (427 Nm @ 4000 RPM) has 227 more torque (in Nm) than 2010 Fiat Linea. (200 Nm @ 1750 RPM). This means 2009 Mercury Mountaineer will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Linea. 2009 Mercury Mountaineer has automatic transmission and 2010 Fiat Linea has manual transmission. 2010 Fiat Linea will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mercury Mountaineer will be easier to drive especially in heavy traffic.
Compare all specifications:
2009 Mercury Mountaineer | 2010 Fiat Linea | |
Make | Mercury | Fiat |
Model | Mountaineer | Linea |
Year Released | 2009 | 2010 |
Body Type | SUV | Sedan |
Engine Position | Front | Front |
Engine Size | 4606 cc | 1248 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 3 valves | 4 valves |
Horse Power | 292 HP | 89 HP |
Engine RPM | 5700 RPM | 4000 RPM |
Torque | 427 Nm | 200 Nm |
Torque RPM | 4000 RPM | 1750 RPM |
Engine Compression Ratio | 9.7:1 | 17.6:1 |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 7 seats | 5 seats |
Number of Doors | 5 doors | 4 doors |
Vehicle Weight | 1832 kg | 1185 kg |
Vehicle Length | 4920 mm | 4570 mm |
Vehicle Width | 1880 mm | 1950 mm |
Vehicle Height | 1860 mm | 1500 mm |
Wheelbase Size | 2890 mm | 2610 mm |
Fuel Consumption Overall | 13.8 L/100km | 4.7 L/100km |
Fuel Tank Capacity | 85 L | 45 L |