2010 Chevrolet Suburban vs. 2013 Kia RIO
To start off, 2013 Kia RIO is newer by 3 year(s). Which means there will be less support and parts availability for 2010 Chevrolet Suburban. In addition, the cost of maintenance, including insurance, on 2010 Chevrolet Suburban would be higher. At 6,000 cc (8 cylinders), 2010 Chevrolet Suburban is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Suburban (352 HP @ 5400 RPM) has 216 more horse power than 2013 Kia RIO. (136 HP @ 6300 RPM). In normal driving conditions, 2010 Chevrolet Suburban should accelerate faster than 2013 Kia RIO. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Suburban weights approximately 1643 kg more than 2013 Kia RIO. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Chevrolet Suburban is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Chevrolet Suburban. However, in wet, icy, snow, or gravel driving conditions, 2013 Kia RIO, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Suburban (517 Nm @ 4200 RPM) has 350 more torque (in Nm) than 2013 Kia RIO. (167 Nm @ 4850 RPM). This means 2010 Chevrolet Suburban will have an easier job in driving up hills or pulling heavy equipment than 2013 Kia RIO. 2010 Chevrolet Suburban has automatic transmission and 2013 Kia RIO has manual transmission. 2013 Kia RIO will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Suburban will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2010 Chevrolet Suburban | 2013 Kia RIO | |
| Make | Chevrolet | Kia |
| Model | Suburban | RIO |
| Year Released | 2010 | 2013 |
| Body Type | SUV | Hatchback |
| Engine Position | Front | Front |
| Engine Size | 6000 cc | 1600 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 352 HP | 136 HP |
| Engine RPM | 5400 RPM | 6300 RPM |
| Torque | 517 Nm | 167 Nm |
| Torque RPM | 4200 RPM | 4850 RPM |
| Fuel Type | Flex Fuel | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | 6-speed manual |
| Number of Seats | 7 seats | 5 seats |
| Number of Doors | 5 doors | 5 doors |
| Vehicle Weight | 2739 kg | 1096 kg |
| Vehicle Length | 5649 mm | 4045 mm |
| Vehicle Width | 2009 mm | 1720 mm |
| Vehicle Height | 1951 mm | 1455 mm |
| Wheelbase Size | 3302 mm | 2570 mm |
| Fuel Tank Capacity | 148 L | 43 L |
