2010 Chrysler Sebring 2 vs. 2010 Chrysler Sebring 2.4 Limited Automatic
To start off, both 2010 Chrysler Sebring 2 and 2010 Chrysler Sebring 2.4 Limited Automatic were released in the same year (2010). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,360 cc (4 cylinders), 2010 Chrysler Sebring 2.4 Limited Automatic is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring 2.4 Limited Automatic (168 HP @ 6000 RPM) has 14 more horse power than 2010 Chrysler Sebring 2. (154 HP @ 6300 RPM) In normal driving conditions, 2010 Chrysler Sebring 2.4 Limited Automatic should accelerate faster than 2010 Chrysler Sebring 2. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring 2.4 Limited Automatic weights approximately 238 kg more than 2010 Chrysler Sebring 2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring 2.4 Limited Automatic (220 Nm @ 4400 RPM) has 30 more torque (in Nm) than 2010 Chrysler Sebring 2. (190 Nm @ 5100 RPM). This means 2010 Chrysler Sebring 2.4 Limited Automatic will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring 2. 2010 Chrysler Sebring 2.4 Limited Automatic has automatic transmission and 2010 Chrysler Sebring 2 has manual transmission. 2010 Chrysler Sebring 2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring 2.4 Limited Automatic will be easier to drive especially in heavy traffic.
Compare all specifications:
2010 Chrysler Sebring 2 | 2010 Chrysler Sebring 2.4 Limited Automatic | |
Make | Chrysler | Chrysler |
Model | Sebring | Sebring |
Year Released | 2010 | 2010 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 1998 cc | 2360 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 154 HP | 168 HP |
Engine RPM | 6300 RPM | 6000 RPM |
Torque | 190 Nm | 220 Nm |
Torque RPM | 5100 RPM | 4400 RPM |
Engine Compression Ratio | 10.5:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1635 kg | 1873 kg |
Vehicle Length | 4860 mm | 4860 mm |
Vehicle Width | 1850 mm | 1850 mm |
Vehicle Height | 1500 mm | 1500 mm |
Wheelbase Size | 2770 mm | 2770 mm |
Fuel Consumption Overall | 7.8 L/100km | 12.3 L/100km |
Fuel Tank Capacity | 63 L | 64 L |