2010 Chrysler Sebring 2.0 CRD vs. 2010 Chrysler Sebring 2.4 Limited
To start off, both 2010 Chrysler Sebring 2.0 CRD and 2010 Chrysler Sebring 2.4 Limited were released in the same year (2010). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,360 cc (4 cylinders), 2010 Chrysler Sebring 2.4 Limited is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring 2.4 Limited (173 HP @ 6000 RPM) has 35 more horse power than 2010 Chrysler Sebring 2.0 CRD. (138 HP @ 4000 RPM) In normal driving conditions, 2010 Chrysler Sebring 2.4 Limited should accelerate faster than 2010 Chrysler Sebring 2.0 CRD. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring 2.4 Limited weights approximately 275 kg more than 2010 Chrysler Sebring 2.0 CRD. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring 2.0 CRD (310 Nm @ 1750 RPM) has 85 more torque (in Nm) than 2010 Chrysler Sebring 2.4 Limited. (225 Nm @ 4400 RPM). This means 2010 Chrysler Sebring 2.0 CRD will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring 2.4 Limited. 2010 Chrysler Sebring 2.4 Limited has automatic transmission and 2010 Chrysler Sebring 2.0 CRD has manual transmission. 2010 Chrysler Sebring 2.0 CRD will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring 2.4 Limited will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2010 Chrysler Sebring 2.0 CRD | 2010 Chrysler Sebring 2.4 Limited | |
| Make | Chrysler | Chrysler |
| Model | Sebring | Sebring |
| Year Released | 2010 | 2010 |
| Body Type | Coupe | Sedan |
| Engine Position | Front | Front |
| Engine Size | 1967 cc | 2360 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 138 HP | 173 HP |
| Engine RPM | 4000 RPM | 6000 RPM |
| Torque | 310 Nm | 225 Nm |
| Torque RPM | 1750 RPM | 4400 RPM |
| Engine Bore Size | 81 mm | 86 mm |
| Engine Stroke Size | 95.5 mm | 101 mm |
| Engine Compression Ratio | 18.5:1 | 9.0:1 |
| Fuel Type | Diesel | Gasoline |
| Drive Type | Front | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1635 kg | 1910 kg |
| Vehicle Length | 4860 mm | 4850 mm |
| Vehicle Width | 1850 mm | 1810 mm |
| Vehicle Height | 1500 mm | 1510 mm |
| Wheelbase Size | 2770 mm | 2770 mm |
| Fuel Consumption Overall | 6.2 L/100km | 9.8 L/100km |
| Fuel Tank Capacity | 63 L | 64 L |
