2010 Chrysler Sebring 2.0 CRD vs. 2010 Chrysler Sebring 2.7 Cabriolet
To start off, both 2010 Chrysler Sebring 2.0 CRD and 2010 Chrysler Sebring 2.7 Cabriolet were released in the same year (2010). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,736 cc (6 cylinders), 2010 Chrysler Sebring 2.7 Cabriolet is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring 2.7 Cabriolet (183 HP @ 5500 RPM) has 45 more horse power than 2010 Chrysler Sebring 2.0 CRD. (138 HP @ 4000 RPM) In normal driving conditions, 2010 Chrysler Sebring 2.7 Cabriolet should accelerate faster than 2010 Chrysler Sebring 2.0 CRD. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring 2.7 Cabriolet weights approximately 185 kg more than 2010 Chrysler Sebring 2.0 CRD. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring 2.0 CRD (310 Nm @ 1750 RPM) has 54 more torque (in Nm) than 2010 Chrysler Sebring 2.7 Cabriolet. (256 Nm @ 4000 RPM). This means 2010 Chrysler Sebring 2.0 CRD will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring 2.7 Cabriolet. 2010 Chrysler Sebring 2.7 Cabriolet has automatic transmission and 2010 Chrysler Sebring 2.0 CRD has manual transmission. 2010 Chrysler Sebring 2.0 CRD will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring 2.7 Cabriolet will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2010 Chrysler Sebring 2.0 CRD | 2010 Chrysler Sebring 2.7 Cabriolet | |
| Make | Chrysler | Chrysler |
| Model | Sebring | Sebring |
| Year Released | 2010 | 2010 |
| Body Type | Coupe | Convertible |
| Engine Position | Front | Front |
| Engine Size | 1967 cc | 2736 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 138 HP | 183 HP |
| Engine RPM | 4000 RPM | 5500 RPM |
| Torque | 310 Nm | 256 Nm |
| Torque RPM | 1750 RPM | 4000 RPM |
| Engine Bore Size | 81 mm | 86 mm |
| Engine Stroke Size | 95.5 mm | 78.5 mm |
| Engine Compression Ratio | 18.5:1 | 9.9:1 |
| Fuel Type | Diesel | Gasoline |
| Top Speed | 203 km/hour | 196 km/hour |
| Acceleration 0-100mph | 11.8 seconds | 10 seconds |
| Drive Type | Front | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 4 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1635 kg | 1820 kg |
| Vehicle Length | 4860 mm | 4940 mm |
| Vehicle Width | 1850 mm | 1850 mm |
| Vehicle Height | 1500 mm | 1490 mm |
| Wheelbase Size | 2770 mm | 2770 mm |
| Fuel Consumption Overall | 6.2 L/100km | 10.7 L/100km |
| Fuel Tank Capacity | 63 L | 63 L |
