2010 Chrysler Sebring vs. 2013 Mitsubishi Outlander
To start off, 2013 Mitsubishi Outlander is newer by 3 year(s). Which means there will be less support and parts availability for 2010 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2010 Chrysler Sebring would be higher. At 2,360 cc (16 cylinders), 2013 Mitsubishi Outlander is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (173 HP @ 6000 RPM) has 7 more horse power than 2013 Mitsubishi Outlander. (166 HP @ 6000 RPM). In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 2013 Mitsubishi Outlander. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 338 kg more than 2013 Mitsubishi Outlander. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 Mitsubishi Outlander is four wheel drive (4WD), it will have significant more traction and grip than 2010 Chrysler Sebring. In wet, icy, snow, or gravel driving conditions, 2013 Mitsubishi Outlander will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Mitsubishi Outlander (226 Nm @ 4100 RPM) has 1 more torque (in Nm) than 2010 Chrysler Sebring. (225 Nm @ 4400 RPM). This means 2013 Mitsubishi Outlander will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2010 Chrysler Sebring has automatic transmission and 2013 Mitsubishi Outlander has manual transmission. 2013 Mitsubishi Outlander will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2010 Chrysler Sebring | 2013 Mitsubishi Outlander | |
Make | Chrysler | Mitsubishi |
Model | Sebring | Outlander |
Year Released | 2010 | 2013 |
Body Type | Sedan | SUV |
Engine Position | Front | Front |
Engine Size | 2358 cc | 2360 cc |
Engine Cylinders | 4 cylinders | 16 cylinders |
Engine Type | in-line | electric |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 173 HP | 166 HP |
Engine RPM | 6000 RPM | 6000 RPM |
Torque | 225 Nm | 226 Nm |
Torque RPM | 4400 RPM | 4100 RPM |
Engine Bore Size | 86 mm | 88 mm |
Engine Stroke Size | 101 mm | 97 mm |
Engine Compression Ratio | 9.5:1 | 10.5:1 |
Fuel Type | Gasoline | Diesel / Electric Hybrid |
Drive Type | Front | 4WD |
Transmission Type | Automatic | 6-speed manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1873 kg | 1535 kg |
Vehicle Length | 4850 mm | 4665 mm |
Vehicle Width | 1810 mm | 1800 mm |
Vehicle Height | 1510 mm | 1680 mm |
Wheelbase Size | 2770 mm | 2670 mm |
Fuel Consumption Highway | 7.8 L/100km | 7.2 L/100km |
Fuel Consumption City | 11.2 L/100km | 9 L/100km |