2010 Fiat Albea vs. 2010 Mazda 3

To start off, both 2010 Fiat Albea and 2010 Mazda 3 were released in the same year (2010). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,500 cc (4 cylinders), 2010 Mazda 3 is equipped with a bigger engine. In terms of performance, 2010 Mazda 3 (167 HP @ 6000 RPM) has 91 more horse power than 2010 Fiat Albea. (76 HP @ 6000 RPM) In normal driving conditions, 2010 Mazda 3 should accelerate faster than 2010 Fiat Albea. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda 3 weights approximately 212 kg more than 2010 Fiat Albea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda 3 (228 Nm @ 4000 RPM) has 113 more torque (in Nm) than 2010 Fiat Albea. (115 Nm @ 3000 RPM). This means 2010 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Albea.

Compare all specifications:

2010 Fiat Albea 2010 Mazda 3
Make Fiat Mazda
Model Albea 3
Year Released 2010 2010
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 1368 cc 2500 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 76 HP 167 HP
Engine RPM 6000 RPM 6000 RPM
Torque 115 Nm 228 Nm
Torque RPM 3000 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1151 kg 1363 kg
Vehicle Length 4220 mm 4506 mm
Vehicle Width 1710 mm 1755 mm
Vehicle Height 1500 mm 1471 mm
Fuel Tank Capacity 51 L 60 L