2010 Fiat Panda vs. 1970 Chrysler Centura
To start off, 2010 Fiat Panda is newer by 40 year(s). Which means there will be less support and parts availability for 1970 Chrysler Centura. In addition, the cost of maintenance, including insurance, on 1970 Chrysler Centura would be higher. At 1,980 cc (4 cylinders), 1970 Chrysler Centura is equipped with a bigger engine. In terms of performance, 1970 Chrysler Centura (118 HP @ 5700 RPM) has 59 more horse power than 2010 Fiat Panda. (59 HP @ 5000 RPM) In normal driving conditions, 1970 Chrysler Centura should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1970 Chrysler Centura weights approximately 255 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1970 Chrysler Centura is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1970 Chrysler Centura. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Chrysler Centura (175 Nm @ 3500 RPM) has 73 more torque (in Nm) than 2010 Fiat Panda. (102 Nm @ 2500 RPM). This means 1970 Chrysler Centura will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 1970 Chrysler Centura has automatic transmission and 2010 Fiat Panda has manual transmission. 2010 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1970 Chrysler Centura will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2010 Fiat Panda | 1970 Chrysler Centura | |
| Make | Fiat | Chrysler |
| Model | Panda | Centura |
| Year Released | 2010 | 1970 |
| Engine Position | Front | Front |
| Engine Size | 1242 cc | 1980 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 59 HP | 118 HP |
| Engine RPM | 5000 RPM | 5700 RPM |
| Torque | 102 Nm | 175 Nm |
| Torque RPM | 2500 RPM | 3500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 860 kg | 1115 kg |
| Vehicle Length | 3540 mm | 4590 mm |
| Vehicle Width | 1580 mm | 1740 mm |
| Vehicle Height | 1550 mm | 1440 mm |
| Wheelbase Size | 2310 mm | 2680 mm |
