2010 Toyota Tundra vs. 2012 Aston Martin V8 Vantage

To start off, 2012 Aston Martin V8 Vantage is newer by 2 year(s). Which means there will be less support and parts availability for 2010 Toyota Tundra. In addition, the cost of maintenance, including insurance, on 2010 Toyota Tundra would be higher. At 5,663 cc (8 cylinders), 2010 Toyota Tundra is equipped with a bigger engine. In terms of performance, 2012 Aston Martin V8 Vantage (420 HP @ 7300 RPM) has 39 more horse power than 2010 Toyota Tundra. (381 HP @ 5600 RPM) In normal driving conditions, 2012 Aston Martin V8 Vantage should accelerate faster than 2010 Toyota Tundra. With that said, vehicle weight also plays an important factor in acceleration. 2012 Aston Martin V8 Vantage weights approximately 299 kg more than 2010 Toyota Tundra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Toyota Tundra is four wheel drive (4WD), it will have significant more traction and grip than 2012 Aston Martin V8 Vantage. In wet, icy, snow, or gravel driving conditions, 2010 Toyota Tundra will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Toyota Tundra (544 Nm @ 3600 RPM) has 75 more torque (in Nm) than 2012 Aston Martin V8 Vantage. (469 Nm @ 5000 RPM). This means 2010 Toyota Tundra will have an easier job in driving up hills or pulling heavy equipment than 2012 Aston Martin V8 Vantage. 2010 Toyota Tundra has automatic transmission and 2012 Aston Martin V8 Vantage has manual transmission. 2012 Aston Martin V8 Vantage will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Toyota Tundra will be easier to drive especially in heavy traffic.

Compare all specifications:

2010 Toyota Tundra 2012 Aston Martin V8 Vantage
Make Toyota Aston Martin
Model Tundra V8 Vantage
Year Released 2010 2012
Body Type Pickup Coupe
Engine Position Front Front
Engine Size 5663 cc 4700 cc
Engine Cylinders 8 cylinders 8 cylinders
Engine Type V V
Valves per Cylinder 4 valves 4 valves
Horse Power 381 HP 420 HP
Engine RPM 5600 RPM 7300 RPM
Torque 544 Nm 469 Nm
Torque RPM 3600 RPM 5000 RPM
Fuel Type Diesel Gasoline
Drive Type 4WD Rear
Transmission Type Automatic 6-speed manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1332 kg 1631 kg
Vehicle Length 5820 mm 4382 mm
Vehicle Width 2040 mm 1867 mm
Vehicle Height 1940 mm 1260 mm
Wheelbase Size 3710 mm 2601 mm
Fuel Consumption Highway 13.8 L/100km 12.4 L/100km
Fuel Consumption City 18.1 L/100km 18.1 L/100km
Fuel Tank Capacity 100 L 80 L