2011 BMW 120 vs. 2012 Chevrolet Colorado

To start off, 2012 Chevrolet Colorado is newer by 1 year(s). Which means there will be less support and parts availability for 2011 BMW 120. In addition, the cost of maintenance, including insurance, on 2011 BMW 120 would be higher. At 2,901 cc (4 cylinders), 2012 Chevrolet Colorado is equipped with a bigger engine. In terms of performance, 2012 Chevrolet Colorado (186 HP @ 5600 RPM) has 18 more horse power than 2011 BMW 120. (168 HP @ 4000 RPM) In normal driving conditions, 2012 Chevrolet Colorado should accelerate faster than 2011 BMW 120. With that said, vehicle weight also plays an important factor in acceleration. 2012 Chevrolet Colorado weights approximately 24 kg more than 2011 BMW 120. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2012 Chevrolet Colorado is four wheel drive (4WD), it will have significant more traction and grip than 2011 BMW 120. In wet, icy, snow, or gravel driving conditions, 2012 Chevrolet Colorado will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 BMW 120 (340 Nm @ 2000 RPM) has 82 more torque (in Nm) than 2012 Chevrolet Colorado. (258 Nm @ 2800 RPM). This means 2011 BMW 120 will have an easier job in driving up hills or pulling heavy equipment than 2012 Chevrolet Colorado. 2011 BMW 120 has automatic transmission and 2012 Chevrolet Colorado has manual transmission. 2012 Chevrolet Colorado will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 BMW 120 will be easier to drive especially in heavy traffic.

Compare all specifications:

2011 BMW 120 2012 Chevrolet Colorado
Make BMW Chevrolet
Model 120 Colorado
Year Released 2011 2012
Engine Position Front Front
Engine Size 1995 cc 2901 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 168 HP 186 HP
Engine RPM 4000 RPM 5600 RPM
Torque 340 Nm 258 Nm
Torque RPM 2000 RPM 2800 RPM
Engine Compression Ratio 16.0:1 10.0:1
Fuel Type Diesel Gasoline
Drive Type Rear 4WD
Transmission Type Automatic Manual
Number of Seats 4 seats 3 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1525 kg 1549 kg
Vehicle Length 4230 mm 4890 mm
Vehicle Width 1440 mm 1750 mm
Vehicle Height 1760 mm 1720 mm
Wheelbase Size 2670 mm 2830 mm
Fuel Consumption Overall 7.1 L/100km 11.8 L/100km
Fuel Tank Capacity 51 L 72 L