2011 Ford Bantam vs. 1996 Lincoln Mark VIII
To start off, 2011 Ford Bantam is newer by 15 year(s). Which means there will be less support and parts availability for 1996 Lincoln Mark VIII. In addition, the cost of maintenance, including insurance, on 1996 Lincoln Mark VIII would be higher. At 4,601 cc (8 cylinders), 1996 Lincoln Mark VIII is equipped with a bigger engine. In terms of performance, 1996 Lincoln Mark VIII (280 HP) has 206 more horse power than 2011 Ford Bantam. (74 HP) In normal driving conditions, 1996 Lincoln Mark VIII should accelerate faster than 2011 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1996 Lincoln Mark VIII weights approximately 2737 kg more than 2011 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1996 Lincoln Mark VIII is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Lincoln Mark VIII. However, in wet, icy, snow, or gravel driving conditions, 2011 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Lincoln Mark VIII (386 Nm @ 4500 RPM) has 276 more torque (in Nm) than 2011 Ford Bantam. (110 Nm @ 3000 RPM). This means 1996 Lincoln Mark VIII will have an easier job in driving up hills or pulling heavy equipment than 2011 Ford Bantam. 1996 Lincoln Mark VIII has automatic transmission and 2011 Ford Bantam has manual transmission. 2011 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Lincoln Mark VIII will be easier to drive especially in heavy traffic.
Compare all specifications:
2011 Ford Bantam | 1996 Lincoln Mark VIII | |
Make | Ford | Lincoln |
Model | Bantam | Mark VIII |
Year Released | 2011 | 1996 |
Body Type | Pickup | Coupe |
Engine Position | Front | Front |
Engine Size | 1295 cc | 4601 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 74 HP | 280 HP |
Torque | 110 Nm | 386 Nm |
Torque RPM | 3000 RPM | 4500 RPM |
Engine Bore Size | 74 mm | 90.2 mm |
Engine Stroke Size | 75.5 mm | 90 mm |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1020 kg | 3757 kg |
Vehicle Length | 4280 mm | 5265 mm |
Vehicle Width | 1470 mm | 1900 mm |
Vehicle Height | 1640 mm | 1361 mm |
Wheelbase Size | 2670 mm | 2870 mm |