2011 Mercury Milan vs. 2004 Aston Martin DB9
To start off, 2011 Mercury Milan is newer by 7 year(s). Which means there will be less support and parts availability for 2004 Aston Martin DB9. In addition, the cost of maintenance, including insurance, on 2004 Aston Martin DB9 would be higher. At 5,935 cc (12 cylinders), 2004 Aston Martin DB9 is equipped with a bigger engine. In terms of performance, 2004 Aston Martin DB9 (454 HP @ 6000 RPM) has 279 more horse power than 2011 Mercury Milan. (175 HP @ 6000 RPM) In normal driving conditions, 2004 Aston Martin DB9 should accelerate faster than 2011 Mercury Milan. With that said, vehicle weight also plays an important factor in acceleration. 2004 Aston Martin DB9 weights approximately 216 kg more than 2011 Mercury Milan. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2004 Aston Martin DB9 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2004 Aston Martin DB9. However, in wet, icy, snow, or gravel driving conditions, 2011 Mercury Milan, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2004 Aston Martin DB9 (570 Nm @ 5000 RPM) has 337 more torque (in Nm) than 2011 Mercury Milan. (233 Nm @ 4500 RPM). This means 2004 Aston Martin DB9 will have an easier job in driving up hills or pulling heavy equipment than 2011 Mercury Milan. 2004 Aston Martin DB9 has automatic transmission and 2011 Mercury Milan has manual transmission. 2011 Mercury Milan will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2004 Aston Martin DB9 will be easier to drive especially in heavy traffic.
Compare all specifications:
2011 Mercury Milan | 2004 Aston Martin DB9 | |
Make | Mercury | Aston Martin |
Model | Milan | DB9 |
Year Released | 2011 | 2004 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 2500 cc | 5935 cc |
Engine Cylinders | 4 cylinders | 12 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 175 HP | 454 HP |
Engine RPM | 6000 RPM | 6000 RPM |
Torque | 233 Nm | 570 Nm |
Torque RPM | 4500 RPM | 5000 RPM |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1500 kg | 1716 kg |
Vehicle Length | 4801 mm | 4720 mm |
Vehicle Width | 1834 mm | 1880 mm |
Vehicle Height | 1445 mm | 1320 mm |
Wheelbase Size | 2728 mm | 2750 mm |
Fuel Tank Capacity | 66 L | 85 L |