2012 Mercedes-Benz E vs. 2010 Chrysler Sebring
To start off, 2012 Mercedes-Benz E is newer by 2 year(s). Which means there will be less support and parts availability for 2010 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2010 Chrysler Sebring would be higher. At 2,143 cc (4 cylinders), 2012 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2012 Mercedes-Benz E (168 HP @ 3000 RPM) has 29 more horse power than 2010 Chrysler Sebring. (139 HP @ 5700 RPM). In normal driving conditions, 2012 Mercedes-Benz E should accelerate faster than 2010 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2012 Mercedes-Benz E weights approximately 180 kg more than 2010 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Mercedes-Benz E (400 Nm @ 1400 RPM) has 211 more torque (in Nm) than 2010 Chrysler Sebring. (189 Nm @ 4350 RPM). This means 2012 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 2012 Mercedes-Benz E has automatic transmission and 2010 Chrysler Sebring has manual transmission. 2010 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
2012 Mercedes-Benz E | 2010 Chrysler Sebring | |
Make | Mercedes-Benz | Chrysler |
Model | E | Sebring |
Year Released | 2012 | 2010 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 2143 cc | 1996 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 168 HP | 139 HP |
Engine RPM | 3000 RPM | 5700 RPM |
Torque | 400 Nm | 189 Nm |
Torque RPM | 1400 RPM | 4350 RPM |
Fuel Type | Diesel | Gasoline |
Top Speed | 229 km/hour | 200 km/hour |
Acceleration 0-100mph | 8.7 seconds | 9.5 seconds |
Drive Type | Rear | Front |
Transmission Type | 7-speed shiftable automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1735 kg | 1555 kg |
Fuel Tank Capacity | 80 L | 61 L |