2012 Suzuki Equator vs. 2010 Chrysler Sebring
To start off, 2012 Suzuki Equator is newer by 2 year(s). Which means there will be less support and parts availability for 2010 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2010 Chrysler Sebring would be higher. At 2,501 cc (4 cylinders), 2012 Suzuki Equator is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (154 HP @ 6300 RPM) has 4 more horse power than 2012 Suzuki Equator. (150 HP @ 5600 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 2012 Suzuki Equator. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 660 kg more than 2012 Suzuki Equator. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 Suzuki Equator is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Suzuki Equator. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (190 Nm @ 5100 RPM) has 19 more torque (in Nm) than 2012 Suzuki Equator. (171 Nm @ 4000 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 2012 Suzuki Equator. 2012 Suzuki Equator has automatic transmission and 2010 Chrysler Sebring has manual transmission. 2010 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Suzuki Equator will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2012 Suzuki Equator | 2010 Chrysler Sebring | |
| Make | Suzuki | Chrysler |
| Model | Equator | Sebring |
| Year Released | 2012 | 2010 |
| Body Type | Pickup | Coupe |
| Engine Position | Front | Front |
| Engine Size | 2501 cc | 1998 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 150 HP | 154 HP |
| Engine RPM | 5600 RPM | 6300 RPM |
| Torque | 171 Nm | 190 Nm |
| Torque RPM | 4000 RPM | 5100 RPM |
| Engine Compression Ratio | 9.5:1 | 10.5:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 975 kg | 1635 kg |
| Vehicle Length | 5250 mm | 4860 mm |
| Vehicle Width | 1860 mm | 1850 mm |
| Vehicle Height | 1790 mm | 1500 mm |
| Wheelbase Size | 3200 mm | 2770 mm |
| Fuel Consumption Overall | 7.2 L/100km | 7.8 L/100km |
| Fuel Tank Capacity | 80 L | 63 L |
