2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic vs. 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual
To start off, both 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic and 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual were released in the same year (2013). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 4,000 cc (6 cylinders), 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual is equipped with a bigger engine. In terms of performance, 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual (233 HP @ 5200 RPM) has 76 more horse power than 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic. (157 HP @ 5200 RPM) In normal driving conditions, 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual should accelerate faster than 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual weights approximately 220 kg more than 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual is four wheel drive (4WD), it will have significant more traction and grip than 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic. In wet, icy, snow, or gravel driving conditions, 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual (361 Nm @ 4000 RPM) has 117 more torque (in Nm) than 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic. (244 Nm @ 3800 RPM). This means 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual will have an easier job in driving up hills or pulling heavy equipment than 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic. 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic has automatic transmission and 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual has manual transmission. 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic will be easier to drive especially in heavy traffic.
Compare all specifications:
2013 Toyota Tacoma Regular Cab 4x2 2.7L 4-Cyl. 4-Speed Automatic | 2013 Toyota Tacoma Access Cab 4x4 4.0L V6 6-Speed Manual | |
Make | Toyota | Toyota |
Model | Tacoma | Tacoma |
Year Released | 2013 | 2013 |
Body Type | Pickup | Pickup |
Engine Position | Front | Front |
Engine Size | 2700 cc | 4000 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 157 HP | 233 HP |
Engine RPM | 5200 RPM | 5200 RPM |
Torque | 244 Nm | 361 Nm |
Torque RPM | 3800 RPM | 4000 RPM |
Engine Bore Size | 95 mm | 94 mm |
Engine Stroke Size | 95 mm | 95 mm |
Engine Compression Ratio | 10.5:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | 4-speed automatic | 6-speed manual |
Number of Seats | 4 seats | 4 seats |
Number of Doors | 5 doors | 4 doors |
Vehicle Weight | 1614 kg | 1834 kg |
Vehicle Length | 5286 mm | 5286 mm |
Vehicle Width | 1835 mm | 1895 mm |
Vehicle Height | 1670 mm | 1775 mm |
Wheelbase Size | 3246 mm | 3246 mm |
Fuel Consumption | 7.7 L/100km | 10.5 L/100km |
Fuel Consumption City | 10 L/100km | 13.7 L/100km |
Fuel Tank Capacity | 80 L | 80 L |