1952 Austin-Healey 100 vs. 2008 Chrysler Grand Voyager
To start off, 2008 Chrysler Grand Voyager is newer by 56 year(s). Which means there will be less support and parts availability for 1952 Austin-Healey 100. In addition, the cost of maintenance, including insurance, on 1952 Austin-Healey 100 would be higher. At 3,301 cc (6 cylinders), 2008 Chrysler Grand Voyager is equipped with a bigger engine. In terms of performance, 2008 Chrysler Grand Voyager (175 HP @ 5100 RPM) has 86 more horse power than 1952 Austin-Healey 100. (89 HP @ 4000 RPM) In normal driving conditions, 2008 Chrysler Grand Voyager should accelerate faster than 1952 Austin-Healey 100. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Grand Voyager weights approximately 1110 kg more than 1952 Austin-Healey 100. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1952 Austin-Healey 100 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1952 Austin-Healey 100. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Grand Voyager, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Grand Voyager (278 Nm @ 4000 RPM) has 134 more torque (in Nm) than 1952 Austin-Healey 100. (144 Nm @ 2500 RPM). This means 2008 Chrysler Grand Voyager will have an easier job in driving up hills or pulling heavy equipment than 1952 Austin-Healey 100. 2008 Chrysler Grand Voyager has automatic transmission and 1952 Austin-Healey 100 has manual transmission. 1952 Austin-Healey 100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Grand Voyager will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1952 Austin-Healey 100 | 2008 Chrysler Grand Voyager | |
| Make | Austin-Healey | Chrysler |
| Model | 100 | Grand Voyager |
| Year Released | 1952 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 2660 cc | 3301 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 89 HP | 175 HP |
| Engine RPM | 4000 RPM | 5100 RPM |
| Torque | 144 Nm | 278 Nm |
| Torque RPM | 2500 RPM | 4000 RPM |
| Engine Bore Size | 87.3 mm | 93 mm |
| Engine Stroke Size | 111.1 mm | 81 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 7 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 945 kg | 2055 kg |
| Vehicle Length | 3860 mm | 4930 mm |
| Vehicle Height | 1250 mm | 1490 mm |
| Wheelbase Size | 2290 mm | 3040 mm |
