1960 Austin A 40 vs. 2008 Hummer H3
To start off, 2008 Hummer H3 is newer by 48 year(s). Which means there will be less support and parts availability for 1960 Austin A 40. In addition, the cost of maintenance, including insurance, on 1960 Austin A 40 would be higher. At 3,653 cc (5 cylinders), 2008 Hummer H3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Hummer H3 weights approximately 1471 kg more than 1960 Austin A 40.
Because 2008 Hummer H3 is four wheel drive (4WD), it will have significant more traction and grip than 1960 Austin A 40. In wet, icy, snow, or gravel driving conditions, 2008 Hummer H3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Hummer H3 (328 Nm @ 4600 RPM) has 260 more torque (in Nm) than 1960 Austin A 40. (68 Nm @ 2000 RPM). This means 2008 Hummer H3 will have an easier job in driving up hills or pulling heavy equipment than 1960 Austin A 40.
Compare all specifications:
1960 Austin A 40 | 2008 Hummer H3 | |
Make | Austin | Hummer |
Model | A 40 | H3 |
Year Released | 1960 | 2008 |
Engine Position | Front | Front |
Engine Size | 997 cc | 3653 cc |
Engine Cylinders | 4 cylinders | 5 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 34 HP | 0 HP |
Torque | 68 Nm | 328 Nm |
Torque RPM | 2000 RPM | 4600 RPM |
Engine Compression Ratio | 8.3:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 760 kg | 2231 kg |
Vehicle Length | 3670 mm | 5180 mm |
Vehicle Height | 1450 mm | 2020 mm |
Wheelbase Size | 2130 mm | 2850 mm |
Fuel Tank Capacity | 26 L | 87 L |