1963 Lancia Fulvia vs. 2005 Mercedes-Benz E
To start off, 2005 Mercedes-Benz E is newer by 42 year(s). Which means there will be less support and parts availability for 1963 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1963 Lancia Fulvia would be higher. At 4,964 cc (8 cylinders), 2005 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2005 Mercedes-Benz E (302 HP @ 5600 RPM) has 212 more horse power than 1963 Lancia Fulvia. (90 HP @ 6000 RPM) In normal driving conditions, 2005 Mercedes-Benz E should accelerate faster than 1963 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 2005 Mercedes-Benz E weights approximately 755 kg more than 1963 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2005 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 1963 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Mercedes-Benz E (460 Nm @ 2700 RPM) has 344 more torque (in Nm) than 1963 Lancia Fulvia. (116 Nm @ 5000 RPM). This means 2005 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1963 Lancia Fulvia. 2005 Mercedes-Benz E has automatic transmission and 1963 Lancia Fulvia has manual transmission. 1963 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1963 Lancia Fulvia | 2005 Mercedes-Benz E | |
| Make | Lancia | Mercedes-Benz |
| Model | Fulvia | E |
| Year Released | 1963 | 2005 |
| Body Type | Coupe | Sedan |
| Engine Position | Front | Front |
| Engine Size | 1297 cc | 4964 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 3 valves |
| Horse Power | 90 HP | 302 HP |
| Engine RPM | 6000 RPM | 5600 RPM |
| Torque | 116 Nm | 460 Nm |
| Torque RPM | 5000 RPM | 2700 RPM |
| Engine Bore Size | 70.8 mm | 97 mm |
| Engine Stroke Size | 78.8 mm | 84 mm |
| Engine Compression Ratio | 10.2:1 | 10.0:1 |
| Fuel Type | Gasoline | Gasoline - Premium |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 970 kg | 1725 kg |
| Vehicle Length | 3990 mm | 4820 mm |
| Vehicle Width | 1570 mm | 1830 mm |
| Vehicle Height | 1300 mm | 1430 mm |
| Wheelbase Size | 2340 mm | 2860 mm |
| Fuel Tank Capacity | 38 L | 80 L |
