1972 Chrysler Sedan vs. 1953 Fiat 1100
To start off, 1972 Chrysler Sedan is newer by 19 year(s). Which means there will be less support and parts availability for 1953 Fiat 1100. In addition, the cost of maintenance, including insurance, on 1953 Fiat 1100 would be higher. At 5,899 cc (8 cylinders), 1972 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1972 Chrysler Sedan (252 HP @ 4400 RPM) has 200 more horse power than 1953 Fiat 1100. (52 HP @ 5400 RPM). In normal driving conditions, 1972 Chrysler Sedan should accelerate faster than 1953 Fiat 1100. With that said, vehicle weight also plays an important factor in acceleration. 1972 Chrysler Sedan weights approximately 740 kg more than 1953 Fiat 1100. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Chrysler Sedan (490 Nm @ 2400 RPM) has 417 more torque (in Nm) than 1953 Fiat 1100. (73 Nm @ 4300 RPM). This means 1972 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1953 Fiat 1100. 1972 Chrysler Sedan has automatic transmission and 1953 Fiat 1100 has manual transmission. 1953 Fiat 1100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Chrysler Sedan will be easier to drive especially in heavy traffic.
Compare all specifications:
1972 Chrysler Sedan | 1953 Fiat 1100 | |
Make | Chrysler | Fiat |
Model | Sedan | 1100 |
Year Released | 1972 | 1953 |
Body Type | Sedan | Convertible |
Engine Position | Front | Front |
Engine Size | 5899 cc | 1088 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 252 HP | 52 HP |
Engine RPM | 4400 RPM | 5400 RPM |
Torque | 490 Nm | 73 Nm |
Torque RPM | 2400 RPM | 4300 RPM |
Drive Type | Rear | Rear |
Transmission Type | Automatic | Manual |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1570 kg | 830 kg |
Vehicle Length | 5010 mm | 3790 mm |
Vehicle Width | 1890 mm | 1470 mm |
Vehicle Height | 1440 mm | 1470 mm |
Wheelbase Size | 2930 mm | 2290 mm |