1980 Audi 200 vs. 2006 Smart ForTwo

To start off, 2006 Smart ForTwo is newer by 26 year(s). Which means there will be less support and parts availability for 1980 Audi 200. In addition, the cost of maintenance, including insurance, on 1980 Audi 200 would be higher. At 2,144 cc (5 cylinders), 1980 Audi 200 is equipped with a bigger engine. In terms of performance, 1980 Audi 200 (170 HP @ 5300 RPM) has 110 more horse power than 2006 Smart ForTwo. (60 HP @ 5250 RPM). In normal driving conditions, 1980 Audi 200 should accelerate faster than 2006 Smart ForTwo. With that said, vehicle weight also plays an important factor in acceleration. 1980 Audi 200 weights approximately 461 kg more than 2006 Smart ForTwo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2006 Smart ForTwo is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Smart ForTwo. However, in wet, icy, snow, or gravel driving conditions, 1980 Audi 200, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Audi 200 (265 Nm @ 3300 RPM) has 170 more torque (in Nm) than 2006 Smart ForTwo. (95 Nm @ 2000 RPM). This means 1980 Audi 200 will have an easier job in driving up hills or pulling heavy equipment than 2006 Smart ForTwo. 2006 Smart ForTwo has automatic transmission and 1980 Audi 200 has manual transmission. 1980 Audi 200 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Smart ForTwo will be easier to drive especially in heavy traffic.

Compare all specifications:

1980 Audi 200 2006 Smart ForTwo
Make Audi Smart
Model 200 ForTwo
Year Released 1980 2006
Engine Position Front Rear
Engine Size 2144 cc 698 cc
Engine Cylinders 5 cylinders 3 cylinders
Engine Type in-line in-line
Horse Power 170 HP 60 HP
Engine RPM 5300 RPM 5250 RPM
Torque 265 Nm 95 Nm
Torque RPM 3300 RPM 2000 RPM
Engine Bore Size 79.5 mm 66.5 mm
Engine Stroke Size 86.4 mm 67 mm
Engine Compression Ratio 7.0:1 9.0:1
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1266 kg 805 kg
Vehicle Length 4700 mm 2510 mm
Vehicle Width 1770 mm 1520 mm
Vehicle Height 1400 mm 1560 mm
Wheelbase Size 2680 mm 1820 mm
Fuel Tank Capacity 75 L 33 L