1956 DKW Munga vs. 2008 Nissan Rogue
To start off, 2008 Nissan Rogue is newer by 52 year(s). Which means there will be less support and parts availability for 1956 DKW Munga. In addition, the cost of maintenance, including insurance, on 1956 DKW Munga would be higher. At 2,488 cc (4 cylinders), 2008 Nissan Rogue is equipped with a bigger engine. In terms of performance, 2008 Nissan Rogue (170 HP @ 6000 RPM) has 133 more horse power than 1956 DKW Munga. (37 HP @ 4200 RPM) In normal driving conditions, 2008 Nissan Rogue should accelerate faster than 1956 DKW Munga. With that said, vehicle weight also plays an important factor in acceleration. 1956 DKW Munga weights approximately 150 kg more than 2008 Nissan Rogue.
Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Nissan Rogue (237 Nm @ 4400 RPM) has 166 more torque (in Nm) than 1956 DKW Munga. (71 Nm @ 3000 RPM). This means 2008 Nissan Rogue will have an easier job in driving up hills or pulling heavy equipment than 1956 DKW Munga.
Compare all specifications:
| 1956 DKW Munga | 2008 Nissan Rogue | |
| Make | DKW | Nissan |
| Model | Munga | Rogue |
| Year Released | 1956 | 2008 |
| Engine Position | Front | Front |
| Engine Size | 896 cc | 2488 cc |
| Engine Cylinders | 3 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 37 HP | 170 HP |
| Engine RPM | 4200 RPM | 6000 RPM |
| Torque | 71 Nm | 237 Nm |
| Torque RPM | 3000 RPM | 4400 RPM |
| Drive Type | 4WD | 4WD |
| Vehicle Weight | 1280 kg | 1130 kg |
| Vehicle Length | 3450 mm | 4650 mm |
| Vehicle Width | 1820 mm | 1810 mm |
| Vehicle Height | 1760 mm | 1670 mm |
| Wheelbase Size | 2010 mm | 2700 mm |
